Weld And Grinder Spatter Repair

Saves - Time - Money - Environment -

Whilst the damaged caused by weld or grinder spatter is nearly identical the more common of the two is grinder spatter.

Looking to remove weld or grinder spatter damage from your glass?

The sparks made when using a grinder to cut material (stone, metal etc) contain very hot tiny fragments of the material being cut which fly off at a very high speed.

They can burn themselves into the glass up to a depth of about 0.75mm.

The surface of the glass will look pitted with small specs of the burnt material within them.

Weld spatter is caused when someone is welding metal (usually handrails) near glass and the sparks from the weld hit the glass, which although it doesn’t have the force of grind spatter, is much hotter and because of this it burns itself into about the same depth.

Whilst ClearAll Glass Repairs can remove and repair weld and grinder spatter it is the most severe job there is in the field of glass polishing being extremely time consuming due to the depth of the damage and normally only cost effective for larger glazed or bespoke units.

As with grinder spatter the surface of the glass will be pitted with small specs of material within which, having been completely burnt will stain the glass.

Whatever the damage ClearAll Glass Repairs can restore your glass in-situ saving you up to 80% of the potential costs for the replacement of your units.

The Benefits Of Glass Repair

TIME

Even the most severe glass scratch can be repaired in a matter of hours, a massive saving of time when compared to the days or even weeks it can take for new glass to be measured, ordered, delivered and installed

COST

The cost of having your glass scratch repaired is on average 80% cheaper than the cost of glass replacement, saving you hundreds or even thousands of pounds

EASE

As the glass scratch is repaired in-situ there is minimal to no damage to the frames or surrounding fittings compared to when fully re-installing a new glass unit, so no further works or other major trades are required

The production of 1000kg of glass creates 605kg of CO2

Repairing glass cuts down on the need for new glass which whilst not a direct benefit to you, the customer, it is a huge benefit to our environment

ENVIRONMENT